Calculadora de costo de patio de pavimentos

Estima pavimentos, base de grava, arena, borde, mano de obra y costo total de instalacion por pie cuadrado.

Dimensiones del patio

Detalles del pavimento

Base y borde

Installed cost range

$8–$25

per square foot

Materials only

$4–$12

per square foot

Costo de mano de obra

$4–$13

per square foot

Typical 12x12 patio

$1,400–$3,600

total installed

Paver Cost by Type

Paver TypeMaterial ($/sq ft)Installed ($/sq ft)Notes
Concrete pavers$3–$6$8–$15Most common, durable
Brick pavers$4–$8$10–$18Classic look, heavy
Natural stone$8–$20$15–$30Premium, unique
Travertine$10–$25$18–$35Upscale, cool underfoot

Ejemplos rapidos

Small 10x10 patio

Basic concrete pavers, simple pattern.

Medium 12x12 patio

Standard 4x8 concrete pavers with gravel base.

Large 20x16 patio

Bigger patio with more material and labor.

Preguntas frecuentes

How much does a paver patio cost per square foot?

A typical paver patio costs $8 to $25 per square foot installed. Materials alone (pavers, sand, gravel, edging) run $4 to $12 per square foot, and labor adds $4 to $13 per square foot depending on pattern complexity and site prep.

How many pavers do I need for a 12x12 patio?

A 12x12 patio is 144 square feet. For 4x8 inch pavers (0.222 sq ft each), you need about 648 pavers plus 10% waste, so plan for about 713 pavers. Adjust the paver size in the calculator for your specific product.

What is the cheapest paver patio option?

Concrete pavers at $1 to $3 per piece are the cheapest option. A basic 12x12 patio with concrete pavers, a 4-inch gravel base, and standard installation costs $1,400 to $3,600 total. Brick and natural stone pavers cost significantly more.

Do I need a gravel base under pavers?

Yes. A 4-inch compacted gravel base is standard for most patios. For driveways or heavy-load areas, use 6 to 8 inches. The gravel base prevents settling and drainage problems that crack pavers over time.

How much does paver patio labor cost?

Labor for paver patio installation costs $4 to $13 per square foot. Simple patterns (running bond, stack bond) are at the low end. Herringbone, circles, and custom inlays are at the high end. Site prep, demolition, and difficult access add to labor cost.