Pente, Paliers, Volume, and Devis Portee

Concrete Ramp Calculator

Estimate concrete for entry ramps, sidewalk transitions, garage thresholds, and switchback planning layouts. Enter rise, run, width, thickness, landings, and quote assumptions to calculate cubic yards, bags, slope, ready-mix cost, and installed quote cost per square foot.

Enter Ramp, Landing, and Quote Details

Ramp Slope Planning Check

Slope: 1:12.0 (8.33%)Sloped ramp length: 24.08 ftConcrete area: 146.33 sq ft

At or flatter than a 1:12 planning check, but this still is not an ADA or local-code approval.

Volume de beton

1.9872 yd3 / 90 bags

Ready-mix check

$477.89 total, $3.27/sq ft

Installed quote check

$64.92/sq ft

Planning-only ramp estimate

This checks concrete material and slope math only. It does not verify ADA, local code, permits, handrails, landings, cross slope, drainage, surface texture, inspections, or structural requirements.

Enregistrez cette estimation ou telechargez un rapport PDF

Le rapport PDF utilise le resultat calcule actuel. Enregistrez dabord lestimation lorsque vous souhaitez reutiliser les donnees plus tard.

Resultats

Estimation en direct
Volume de beton

1.9872 yd³

53.6553 ft³ / 1.5193 m³

Sacs necessaires

90 sacs

Arrondi aux sacs entiers

Cout estime

$450.00

Base sur le prix du sac

Marge

10%

Inclus dans le volume total

Estimation beton en yards

Votre estimation de 1.9872 yd3 represente environ 90 sacs apres marge. Utilisez le nombre de yards pour choisir le mode d achat avant de commander.

Zone de comparaison sacs vs ready-mix

C est la plage ou le beton en sacs peut sembler moins cher, mais livraison, frais petite charge, aide disponible et vitesse de placement peuvent changer la meilleure option.

Controles devis suivants

Utilisez ce volume pour comparer ready-mix livre, beton en sacs, frais de livraison, petite charge et manques du devis avant commande.

Reponse rapide

A 24 in rise ramp with 24 ft of horizontal run, 4 ft clear width, two 5 ft by 5 ft landings, 4 in average thickness, and 10% waste needs about 1.98 yd3 of concrete. The slope preview is about 1:12. This is a material and quote planning check, not ADA, permit, inspection, or code approval.

Portée de l'accessibilité de la rampe

Convertir la pente et les yards de rampe en checklist de préparation de devis

Most ramp calculators stop at slope or concrete volume. Ramp work also needs landings, thresholds, surface texture, drainage, handrails, edge protection, access, permits, inspections, and a clear planning-only boundary before the number is quote-ready.

Scope status

Permit quote review

57/100 quote-readiness score

Slope check

1:12

8.33% slope, 24 in rise

Buying pressure

Ready-mix likely

146.3 sq ft, 1.9872 yd3

Élément de portéeStatutQuoi verifier
Slope ratio and rise/runconfirmThe planning slope is about 1:12.0. Still confirm cross slope, landings, and local code separately.
Landings, turns, and thresholdsconfirmLanding concrete is included. Confirm top, bottom, intermediate, threshold, and sidewalk tie-in dimensions.
Surface texture and drainageaskAsk who owns broom direction, slip resistance, cross slope, drainage discharge, ponding corrections, and curing protection.
Handrails and edge protectionaskRail coordination, embeds, sleeves, edge curbs, guards, and correction work may sit outside concrete material pricing.
Demolition, base, and compactionaskConfirm removal, excavation, base stone, compaction, unsuitable soil, haul-off, and cleanup as written line items.
Access and placement methodaskConfirm chute reach, pump or buggy cost, wheelbarrow route, wait time, washout, protection, and finishing crew timing.
Permit and inspection responsibilityaskPublic-access ramps can require permits, inspections, plan review, and written responsibility for corrections.
Installed quote per square footconfirmInstalled quote normalizes to about $64.92/sq ft. Compare this against material-only concrete plus scope lines.
1Does the quote state total rise, total horizontal run, ramp width, and the 1:12.0 planning slope?
2Are top, bottom, intermediate, switchback, doorway, threshold, and sidewalk tie-in landings included?
3Who owns handrails, embeds, edge protection, surface texture, drainage, cross slope, and ponding corrections?
4Are demolition, base prep, compaction, forms, reinforcement, delivery access, washout, cleanup, permits, and inspections written down?

Formule

Pente de rampe et longueur de tablier incliné

Slope percent = rise / horizontal run x 100Slope = 2.0000 / 24.0000 x 100 = 8.33%; planning ratio = 1:12.00Sloped ramp length = sqrt(run^2 + rise^2) = 24.0832 ft

Volume de béton rampe et palier

Ramp area = sloped length x ramp width; landing area = landing count x landing length x landing widthGross volume = (96.33 + 50.00) x 0.3333 = 48.7776 ft3 (1.8066 yd3)

Utiliser area cost as a quote check

Material-only cost per square foot helps separate concrete quantity from demolition, forms, rail coordination, surface texture, drainage, permits, inspection corrections, and cleanup.

Exemples d estimations de rampe

24 in rise entry ramp

24 ft run, 4 ft width, two 5 ft x 5 ft landings, 4 in average thickness, 10% waste.

Resultat: 1.9872 yd3 / 90 bags / 1:12.0 slope check

Sidewalk transition ramp

12 ft run, 5 ft width, 6 in rise, one 5 ft x 5 ft landing, 5 in average thickness.

Resultat: 1.4438 yd3 / 65 bags / 1:24.0 slope check

Switchback planning check

Two 18 ft runs, 4 ft width, 36 in total rise, three 5 ft x 5 ft landings.

Resultat: 2.9809 yd3 / 135 bags / 1:12.0 slope check

Mesure Pases

  • Measure total rise from finished low point to finished high point, not from rough subgrade.
  • Use horizontal run for slope, then let the calculator convert it to sloped ramp deck length for concrete volume.
  • Add every landing that is part of the concrete scope, including switchback, door, sidewalk, and transition landings.
  • Keep material-only concrete cost separate from rails, demo, base prep, forms, inspections, and corrections.

Planification Limite

  • The slope preview is a math check, not an accessibility approval.
  • Confirm ADA, local code, landings, cross slope, handrails, edge protection, surface texture, and permits separately.
  • Ask who is responsible for inspection corrections before approving a ramp quote.
  • For structural or public-access work, get qualified local review before construction.

Rampe Devis Portee Verificationlist

PortéePourquoi c est importantDemander avant de signer
Rise and runSlope drives ramp length, landing count, handrail scope, and available site footprint.Does the quote list total rise, run length, slope ratio, and where landings occur?
Landings and turnsTop, bottom, and intermediate landings add area, forms, transitions, and finish work.Are all landings, switchbacks, door thresholds, and sidewalk tie-ins included?
Mains courantes et protection des bordsRailings, embeds, sleeves, edge curbs, and guards may be separate from concrete.Are rails, anchors, embeds, edge protection, and final corrections included or excluded?
Surface and drainageTexture, cross slope, low spots, and water discharge affect safety and inspection risk.Who is responsible for broom direction, slip resistance, drainage, and ponding corrections?
Demo and base prepExisting steps, walks, asphalt, landscaping, and unsuitable base can dominate the installed price.Are demolition, excavation, base stone, compaction, haul-off, and cleanup written down?
Permits and inspectionsAccessibility work may require plan review, inspections, or corrections.Who handles permits, inspection scheduling, local accessibility requirements, and rework?
Delivery and placementLong ramps, tight entrances, or back-yard access can require pump, buggy, chute extensions, or extra labor.Does the quote include access limits, pump/buggy cost, wait time, washout, and protection?

Guide d achat et de devis pour rampe beton

Use this concrete ramp calculator when the search intent is slope, rise, run, landings, and concrete material quantity. For a flat patio, pad, or sidewalk, use the concrete slab calculator instead.

For ADA or commercial ramp planning, read the ADA ramp concrete cost guide, compare delivery in the ready-mix vs bags calculator, and review supplier or contractor scope in the concrete quote reviewer.

Questions frequentes

How do I calculate concrete for a ramp?
Measure horizontal run, total rise, ramp width, average thickness, and landing area. The calculator uses sloped ramp length for the ramp slab, adds flat landings, then applies waste to estimate cubic yards, bags, and material cost.
Does this concrete ramp calculator verify ADA compliance?
No. It shows slope math and concrete quantity only. ADA, local code, landings, handrails, cross slope, edge protection, drainage, permits, inspections, and structural details must be confirmed with qualified local professionals.
What does a 1:12 ramp slope mean?
A 1:12 planning ratio means 12 units of horizontal run for 1 unit of rise. This calculator can show whether your entered layout is steeper or flatter than that planning check, but it does not approve the layout.
Should ramp landings be included in the concrete volume?
Yes, when the landings are part of the same concrete scope. Add the top, bottom, and intermediate landings so the volume and quote comparison include the full pour area.
Why compare ramp cost per square foot?
Ramp bids often include far more than concrete: layout, demolition, forms, base prep, reinforcement, texture, drainage, rail coordination, inspections, and cleanup. Cost per square foot helps compare material-only and installed quotes without confusing them.

Avertissement: This concrete ramp calculator estimates material volume, bags, slope math, and quote comparison only. It does not verify ADA, accessibility, building-code, permit, inspection, drainage, handrail, surface, structural, or public-right-of-way requirements. Confirm ramp work with qualified local professionals.