Concrete steps cost breakdown
Concrete Steps Cost Calculator
Answer first: poured concrete steps cost $300–$500 per step installed in 2026. A 3-step entry stoop runs $900–$1,500. A 5-step entry: $1,500–$2,500. Precast concrete steps are cheaper ($100–$200/step) but limited in size. Use this calculator to compare poured vs precast costs.
3-step entry stoop — poured concrete
$900–$1,500 total installed ($300–$500/step)
Standard 7-in rise, 11-in tread, 48-in width. Includes concrete volume (~1.09 yd³), forms, rebar, broom finish, and cleanup. Landing pad adds $400–$800.
5-step staircase
$1,500–$2,500 total installed
Common for split-level entries. At this height (35 in total rise), rebar reinforcement and proper footing below frost line become critical. Get a quote that includes footing depth.
Poured vs precast concrete steps
Poured: $300–$500/step | Precast: $100–$200/step installed
Precast steps are cheaper and faster but limited to standard widths (36–60 in). Poured steps match any entry width and can include a landing. Precast steps are easier to replace if damaged.
Total cost by number of steps (poured concrete, 2026)
2 steps: $600–$1,000 | 3 steps: $900–$1,500 | 5 steps: $1,500–$2,500 | 8 steps: $2,400–$4,000
These are bare-step costs. Add $400–$1,500 for a landing pad, $200–$800 for steel handrails, and $300–$600 for permits. Steps over 30 in tall require a railing in most jurisdictions.
Interactive workflow
Run the numbers, then save or export the project
How much do concrete steps cost per step?
Poured concrete steps cost $300–$500 per step installed in 2026. A 3-step entry stoop runs $900–$1,500. A 5-step entry costs $1,500–$2,500. Precast concrete steps cost $100–$200 per step for standard widths. Total cost includes footing, forms, concrete, rebar, broom finish, and cleanup.
How much concrete do I need for 3 steps?
For a standard 3-step entry stoop (7-in rise, 11-in tread, 48-in wide) with a 24-in landing: approximately 1.09 cubic yards with 10% waste or about 50 bags of 80-lb concrete. Use the calculator above with your exact dimensions and tread/riser measurements.
Do concrete steps need rebar?
Yes, all structural concrete steps should have rebar. Standard reinforcement: horizontal #4 rebar at 12-in spacing embedded in each tread and riser, plus vertical bars tied to the footing. Without rebar, concrete steps are prone to cracking and spalling — especially in freeze-thaw climates. Some small decorative steps use wire mesh as a minimum.
What permits do I need for concrete steps?
Most municipalities require a permit for new concrete steps attached to a structure. A landing larger than 30 sq ft typically requires a permit. Steps over 30 in tall usually require a handrail. Check with your local building department before starting — inspections are often required at the footing stage and again at completion.
Should I repair or replace my concrete steps?
Repair when: surface spalling covers less than 25% of the tread, cracks are hairline-only, and all treads are level. Replace when: steps have heaved or settled, cracks are structural (through the full thickness), spalling covers more than 30% of treads, or the footing has shifted. Full replacement costs more upfront but provides a fresh 25–50 year lifespan.