Pendiente, Descansos, Volumen, and Cotizacion Alcance

Concrete Ramp Calculator

Estimate concrete for entry ramps, sidewalk transitions, garage thresholds, and switchback planning layouts. Enter rise, run, width, thickness, landings, and quote assumptions to calculate cubic yards, bags, slope, ready-mix cost, and installed quote cost per square foot.

Enter Ramp, Landing, and Quote Details

Ramp Slope Planning Check

Slope: 1:12.0 (8.33%)Sloped ramp length: 24.08 ftConcrete area: 146.33 sq ft

At or flatter than a 1:12 planning check, but this still is not an ADA or local-code approval.

Volumen de concreto

1.9872 yd3 / 90 bags

Ready-mix check

$477.89 total, $3.27/sq ft

Installed quote check

$64.92/sq ft

Planning-only ramp estimate

This checks concrete material and slope math only. It does not verify ADA, local code, permits, handrails, landings, cross slope, drainage, surface texture, inspections, or structural requirements.

Guarda esta estimacion o descarga un reporte PDF

El reporte PDF usa el resultado calculado actual. Guarda la estimacion primero cuando quieras reutilizar los datos despues.

Resultados

Estimacion en vivo
Volumen de concreto

1.9872 yd³

53.6553 ft³ / 1.5193 m³

Bolsas necesarias

90 bolsas

Redondeado a bolsas enteras

Costo estimado

$450.00

Basado en el precio por bolsa

Desperdicio

10%

Incluido en el volumen total

Estimacion de concreto en yardas

Tu estimacion de 1.9872 yd3 equivale aproximadamente a 90 bolsas despues del desperdicio. Usa el numero de yardas para elegir como comprar antes de ordenar.

Zona de comparacion bolsas vs ready-mix

Este es el rango donde el concreto en bolsas puede verse mas barato, pero entrega, cargos de carga corta, ayuda disponible y velocidad de colocacion pueden cambiar la mejor opcion.

Siguientes revisiones de cotizacion

Usa este volumen para comparar ready-mix entregado, concreto en bolsas, entrega, cargos de carga corta y huecos de cotizacion antes de ordenar.

Respuesta rapida

A 24 in rise ramp with 24 ft of horizontal run, 4 ft clear width, two 5 ft by 5 ft landings, 4 in average thickness, and 10% waste needs about 1.98 yd3 of concrete. The slope preview is about 1:12. This is a material and quote planning check, not ADA, permit, inspection, or code approval.

Alcance de accesibilidad de rampa

Convierta pendiente y yardas de rampa en lista de verificación de cotización

Most ramp calculators stop at slope or concrete volume. Ramp work also needs landings, thresholds, surface texture, drainage, handrails, edge protection, access, permits, inspections, and a clear planning-only boundary before the number is quote-ready.

Scope status

Permit quote review

57/100 quote-readiness score

Slope check

1:12

8.33% slope, 24 in rise

Buying pressure

Ready-mix likely

146.3 sq ft, 1.9872 yd3

Elemento del alcanceEstadoQue verificar
Slope ratio and rise/runconfirmThe planning slope is about 1:12.0. Still confirm cross slope, landings, and local code separately.
Landings, turns, and thresholdsconfirmLanding concrete is included. Confirm top, bottom, intermediate, threshold, and sidewalk tie-in dimensions.
Surface texture and drainageaskAsk who owns broom direction, slip resistance, cross slope, drainage discharge, ponding corrections, and curing protection.
Handrails and edge protectionaskRail coordination, embeds, sleeves, edge curbs, guards, and correction work may sit outside concrete material pricing.
Demolition, base, and compactionaskConfirm removal, excavation, base stone, compaction, unsuitable soil, haul-off, and cleanup as written line items.
Access and placement methodaskConfirm chute reach, pump or buggy cost, wheelbarrow route, wait time, washout, protection, and finishing crew timing.
Permit and inspection responsibilityaskPublic-access ramps can require permits, inspections, plan review, and written responsibility for corrections.
Installed quote per square footconfirmInstalled quote normalizes to about $64.92/sq ft. Compare this against material-only concrete plus scope lines.
1Does the quote state total rise, total horizontal run, ramp width, and the 1:12.0 planning slope?
2Are top, bottom, intermediate, switchback, doorway, threshold, and sidewalk tie-in landings included?
3Who owns handrails, embeds, edge protection, surface texture, drainage, cross slope, and ponding corrections?
4Are demolition, base prep, compaction, forms, reinforcement, delivery access, washout, cleanup, permits, and inspections written down?

Formula

Pendiente de rampa y longitud de tablero inclinado

Slope percent = rise / horizontal run x 100Slope = 2.0000 / 24.0000 x 100 = 8.33%; planning ratio = 1:12.00Sloped ramp length = sqrt(run^2 + rise^2) = 24.0832 ft

Volumen de concreto de rampa y descanso

Ramp area = sloped length x ramp width; landing area = landing count x landing length x landing widthGross volume = (96.33 + 50.00) x 0.3333 = 48.7776 ft3 (1.8066 yd3)

Usa area cost as a quote check

Material-only cost per square foot helps separate concrete quantity from demolition, forms, rail coordination, surface texture, drainage, permits, inspection corrections, and cleanup.

Ejemplos de estimados de rampa

24 in rise entry ramp

24 ft run, 4 ft width, two 5 ft x 5 ft landings, 4 in average thickness, 10% waste.

Resultado: 1.9872 yd3 / 90 bags / 1:12.0 slope check

Sidewalk transition ramp

12 ft run, 5 ft width, 6 in rise, one 5 ft x 5 ft landing, 5 in average thickness.

Resultado: 1.4438 yd3 / 65 bags / 1:24.0 slope check

Switchback planning check

Two 18 ft runs, 4 ft width, 36 in total rise, three 5 ft x 5 ft landings.

Resultado: 2.9809 yd3 / 135 bags / 1:12.0 slope check

Medicion Noas

  • Measure total rise from finished low point to finished high point, not from rough subgrade.
  • Use horizontal run for slope, then let the calculator convert it to sloped ramp deck length for concrete volume.
  • Add every landing that is part of the concrete scope, including switchback, door, sidewalk, and transition landings.
  • Keep material-only concrete cost separate from rails, demo, base prep, forms, inspections, and corrections.

Planificacion Limite

  • The slope preview is a math check, not an accessibility approval.
  • Confirm ADA, local code, landings, cross slope, handrails, edge protection, surface texture, and permits separately.
  • Ask who is responsible for inspection corrections before approving a ramp quote.
  • For structural or public-access work, get qualified local review before construction.

Rampa Cotizacion Alcance Verificacionlist

AlcancePor que importaPreguntar antes de firmar
Rise and runSlope drives ramp length, landing count, handrail scope, and available site footprint.Does the quote list total rise, run length, slope ratio, and where landings occur?
Landings and turnsTop, bottom, and intermediate landings add area, forms, transitions, and finish work.Are all landings, switchbacks, door thresholds, and sidewalk tie-ins included?
Pasamanos y protección de bordesRailings, embeds, sleeves, edge curbs, and guards may be separate from concrete.Are rails, anchors, embeds, edge protection, and final corrections included or excluded?
Surface and drainageTexture, cross slope, low spots, and water discharge affect safety and inspection risk.Who is responsible for broom direction, slip resistance, drainage, and ponding corrections?
Demo and base prepExisting steps, walks, asphalt, landscaping, and unsuitable base can dominate the installed price.Are demolition, excavation, base stone, compaction, haul-off, and cleanup written down?
Permits and inspectionsAccessibility work may require plan review, inspections, or corrections.Who handles permits, inspection scheduling, local accessibility requirements, and rework?
Delivery and placementLong ramps, tight entrances, or back-yard access can require pump, buggy, chute extensions, or extra labor.Does the quote include access limits, pump/buggy cost, wait time, washout, and protection?

Guia de compra y cotizacion de rampa de concreto

Use this concrete ramp calculator when the search intent is slope, rise, run, landings, and concrete material quantity. For a flat patio, pad, or sidewalk, use the concrete slab calculator instead.

For ADA or commercial ramp planning, read the ADA ramp concrete cost guide, compare delivery in the ready-mix vs bags calculator, and review supplier or contractor scope in the concrete quote reviewer.

Preguntas frecuentes

How do I calculate concrete for a ramp?
Measure horizontal run, total rise, ramp width, average thickness, and landing area. The calculator uses sloped ramp length for the ramp slab, adds flat landings, then applies waste to estimate cubic yards, bags, and material cost.
Does this concrete ramp calculator verify ADA compliance?
No. It shows slope math and concrete quantity only. ADA, local code, landings, handrails, cross slope, edge protection, drainage, permits, inspections, and structural details must be confirmed with qualified local professionals.
What does a 1:12 ramp slope mean?
A 1:12 planning ratio means 12 units of horizontal run for 1 unit of rise. This calculator can show whether your entered layout is steeper or flatter than that planning check, but it does not approve the layout.
Should ramp landings be included in the concrete volume?
Yes, when the landings are part of the same concrete scope. Add the top, bottom, and intermediate landings so the volume and quote comparison include the full pour area.
Why compare ramp cost per square foot?
Ramp bids often include far more than concrete: layout, demolition, forms, base prep, reinforcement, texture, drainage, rail coordination, inspections, and cleanup. Cost per square foot helps compare material-only and installed quotes without confusing them.

Descargo de responsabilidad: This concrete ramp calculator estimates material volume, bags, slope math, and quote comparison only. It does not verify ADA, accessibility, building-code, permit, inspection, drainage, handrail, surface, structural, or public-right-of-way requirements. Confirm ramp work with qualified local professionals.