Walkway cost — material + installed
Concrete Walkway Cost Calculator
Answer first: concrete walkway costs $7–$12 per sq ft installed in 2026. A 4 ft × 50 ft walkway (200 sq ft) runs $1,400–$2,400. Per linear foot at 4-ft width: $28–$48/lin ft. Includes excavation, base, 4-in slab, and broom finish.
4 ft × 50 ft standard walkway (200 sq ft)
$1,400–$2,400 installed ($7–$12/sq ft)
Broom finish for slip resistance, control joints every 4–5 ft, broom finish. At 4 ft wide, this is ADA-compatible width. Concrete volume: 2.47 yd³ with 10% waste.
4 ft × 100 ft longer walkway (400 sq ft)
$2,800–$4,800 installed
Longer walkways benefit from ready-mix efficiency. At this length, ready-mix is mandatory — mixing 112+ bags by hand is not practical. Slope the walkway 1% away from the house for drainage.
Concrete walkway vs pavers — same 200 sq ft
Concrete: $1,400–$2,400 | Pavers: $3,000–$5,000
Concrete costs 40–50% less to install. Pavers allow individual piece replacement if damaged. For a main entry walkway where aesthetics matter, pavers often win; for utility paths, concrete wins on cost.
Interactive workflow
Run the numbers, then save or export the project
How much does a concrete walkway cost?
A concrete walkway costs $7–$12 per sq ft installed in 2026. At 4 ft wide (the standard accessible walkway width), that is $28–$48 per linear foot. A 50-ft walkway runs $1,400–$2,400. Cost drivers include length, width, site access, excavation depth, and whether the walkway needs to meet ADA accessibility requirements (1% cross-slope, 5% running slope max).
How much concrete do I need for a walkway?
For a 4 ft × 50 ft walkway at 4 inches deep: 4 × 50 × 0.333 ÷ 27 = 2.47 yd³ before waste. With 10% waste: 2.72 yd³ or about 112 bags of 80-lb concrete. Use the calculator above with your length, width, and thickness to get exact quantities. Ready-mix is recommended for walkways over 50 linear feet — mixing 100+ bags by hand is impractical.
How wide should a concrete walkway be?
A single-person walkway needs 3 ft minimum. A comfortable 2-person walkway needs 4–5 ft. ADA-accessible walkways require 36 in minimum clear width (48 in preferred). Walkways leading to entry doors are typically 4–5 ft wide. For garden paths or secondary walks, 2–3 ft is acceptable for single-file use.
How long does a concrete walkway last?
A properly installed concrete walkway lasts 25–50 years with minimal maintenance. Main longevity factors: adequate subgrade compaction (poor compaction is the top cause of walkway failure), correct control joints (every 4–5 ft for a 4-in slab), keeping large tree roots away from the walkway, and avoiding de-icing salts. Reseal every 5 years in freeze-thaw climates.
Can I replace a concrete walkway with pavers?
Yes, and pavers are a popular alternative. Paver walkways cost $15–$25/sq ft installed (more than concrete) but are easier to repair by replacing individual pieces. Pavers also allow for drainage gaps and can be reset if they heave. For a standard 4 ft × 50 ft walk, concrete costs $1,400–$2,400 installed; pavers cost $3,000–$5,000. The long-term cost difference depends on whether you need to repair sections.