Poids du beton par verge cube, pied cube et metre cube

Calculateur de Poids du Beton

D'abord la reponse: le beton normal pese environ 4050 lb par verge cube. Entrez votre volume pour calculer le poids total.

Calculer le poidsCalculate concrete volume

Beton normal de poids standard

~4050 lb par vc

Le beton leger pese 3000-3500 lb/vc.

Dalle 10x10 pi, 4 po

~2700 lb de beton

Avec la densite standard de 4050 lb/vc.

Vérification interactive de poids et charge

Dimensions en livres, kilogrammes, tonnes et charges

Choose the geometry, keep density visible, and compare the total with a payload capacity and disposal rate you obtained from the actual provider or project.

Unit system
Input method
ft
ft
in
qty
lb/ft3
lb
short tons
$/short ton

Carte des poids

Volume x densité + acier entré = poids de planification.

1.23 yd32.5 short tons

Total planning weight

5,000 lb

2.5 short tons / 2.27 metric tonnes.

Concrete volume

1.23 yd3

33.33 ft3 at 150 lb/ft3.

Weight per area

50 lb/ft2

Planning dead weight only; not a structural capacity check.

Payload comparison

2 loads

$187 at the entered weight-based rate.

Vérification de densité
150 lb/ft3 equals about 2,403 kg/m3. Replace the preset when project data is available.
Vérification de charge complète
Add container tare, soil, moisture, mixed debris, equipment, pallets, and anything else riding in the actual load.
Limite d'approbation
The load count compares entered numbers only. It does not approve a vehicle, axle, container, route, structure, rigging plan, or lift.

Interactive workflow

Run the numbers, then save or export the project

View planning notes
Best reviewed quote
Ready-mix supplier A
Red flags
0
Proposal total
$3,824
Pour window
171 min
Couts locaux par defaut et memoire ZIP

Valeurs par defaut sauvegardees

Reuse bag price, ready-mix price, delivery fee, and waste factor across quote reviews.

Hypothèses locales
ZIP47474
1 yd3 as bags$259
1 yd3 ready-mix$475
Break-even3.3 yd3
  • 80 lb bag price: $6
  • Ready-mix price per yd3: $165
  • Delivery + short-load: $310
  • Wait-time rate: $95 per hour

Enregistrez cette estimation ou telechargez un rapport PDF

Le rapport PDF utilise le resultat calcule actuel. Enregistrez dabord lestimation lorsque vous souhaitez reutiliser les donnees plus tard.

Poids par volume
Calculez le poids en livres et tonnes pour n'importe quel volume de beton.
Comparaison des densites
Comparez le poids du beton normal, leger et haute densite.
Planification de la charge
Verifiez si la charge est dans les limites de votre structure.

Concrete weight planning checklist

Use these checks before relying on the result for removal, transport, disposal, lifting, or structural work.

Signal to checkWhat it meansNext step
Dimensions and thicknessThe measured slab sections, thickened edges, footings, toppings, columns, and quantity match what is being moved or removed.Measure separate sections instead of hiding every thickness inside one average.
Density assumptionThe selected lb/ft3 or kg/m3 value matches the intended planning source and concrete type.Use project-specific data when the result affects a lift, structure, freight plan, or contractual limit.
Whole loadSteel, soil, moisture, coatings, asphalt, mixed debris, pallets, tools, container tare, and equipment are included or explicitly excluded.Do not compare concrete-only weight with a whole-vehicle or whole-container limit.
Payload and disposal ruleThe provider confirms allowed material, included weight, maximum payload, fill line, overage rate, and rejected-load policy.Replace the planning inputs with the written provider limits before scheduling.
Professional boundaryThe calculator has not been used to approve structural capacity, crane picks, rigging, vehicle loading, axle compliance, or road access.Use qualified engineering, lifting, transport, and local regulatory review where required.

Related concrete planning tools

Move from a single calculation into a purchase, proposal, or pour-day decision with connected calculators and checklists.

Concrete Volume Calculator
Calculate yards, cubic feet, or cubic meters for other concrete shapes before converting to weight.
Concrete Slab Calculator
Estimate new slab volume, bags, waste, and ready-mix quantity.
Concrete Block Weight Calculator
Estimate 8x8x16 CMU, cinder block, pallet, payload, and block-wall delivery weight.
Concrete Density Guide
Review the 145-150 lb/ft3 planning range, one-yard weight, and assumption limits.
Measure Concrete Thickness
Confirm slab thickness before using weight for demolition or hauling.
Concrete Dumpster Cost Guide
Compare container limits, clean-concrete rules, included tons, and overage fees.
Concrete Removal Cost Calculator
Turn weight into demo, haul, disposal, and base-repair scope after the payload screen.
Concrete Quote Reviewer
Check demolition, loading, haul-off, disposal, scale-ticket, and overweight scope.

Combien pese le beton par pied cube?

Le beton normal pese environ 150 lb/pi3 (4050 lb/vc).

Combien pese une dalle en beton?

Une dalle de 4 pouces pese environ 50 lb/pi2. Une de 6 pouces pese 75 lb/pi2.

Ma terrasse peut-elle supporter le beton?

La plupart des terrasses supportent 40-60 lb/pi2. Le beton est trop lourd — consultez un ingenieur.

Combien pese le beton vs le bois?

Le beton pese ~150 lb/pi3 vs 30-60 lb/pi3 pour le bois.

Combien pese le beton pret-a-gacher?

Le beton durci pese la meme chose: ~150 lb/pi3 ou 4050 lb/vc.

Comment calculer le poids de mon projet?

Multipliez le volume en pi3 par 150 lb/pi3, ou en vc par 4050 lb/vc.

Planning disclaimer

Les poids sont pour le beton normal. Le beton leger a des poids differents.