Material cost + installed cost estimate
Price for Concrete Per Square Foot
Answer first: Concrete material costs $1.50–$5 per square foot for a 4-inch slab. With labor and finishing, installed concrete runs $4–$12/sq ft depending on project type.
Material only (4-inch slab)
$1.50–$5 per sq ft
Varies by region, mix design, and market conditions.
Installed (labor + material)
$4–$12 per sq ft
Plain concrete slab. Stamped or decorative adds $5–$15/sq ft more.
Price for Concrete Per Square Foot
Enter dimensions and local prices for your cost per sq ft.
Area
100 sq ft
Ready-mix/sq ft
$3.74
Bags/sq ft
$3.10
Total ready-mix
$374
Interactive workflow
Run the numbers, then save or export the project
What drives concrete cost per square foot
The cost per sq ft depends on thickness, mix design, delivery fees, and labor.
| Benchmark says | Replace with local input | Next check |
|---|---|---|
| Thickness matters most | A 4-inch slab uses 0.33 ft³/sq ft. A 6-inch slab uses 0.5 ft³/sq ft — 50% more concrete for the same area. | Residential slabs: 4 inches. Driveways and garage floors: 4–6 inches. Use the calculator for your thickness. |
| Delivery fee spreads over area | A $150 delivery fee on a 200 sq ft slab adds $0.75/sq ft. On a 500 sq ft slab it's only $0.30/sq ft. | Larger pours have lower effective cost per sq ft — the fixed delivery fee gets diluted. |
| Bags vs ready-mix crossover | For small pours under 1–2 yd³, bags can be cheaper. Above that, ready-mix typically wins. | The calculator shows both — enter your local prices to see the crossover for your project. |
Concrete cost per sq ft checklist
What you need to calculate accurate concrete cost per square foot.
| Signal to check | What it means | Next step |
|---|---|---|
| Slab dimensions | You know the length, width, and planned thickness. | Measure the area — use the calculator above for instant cost per sq ft. |
| Local ready-mix price | You have a local price per cubic yard (call 2–3 plants). | Average US price is $150–$200/yd³. Your region may vary significantly. |
| Delivery fee | You know the delivery fee for your area. | Typical delivery fee: $100–$200. Short-load surcharge may apply for small orders. |
| Labor scope | You know if this is material-only or installed (with labor). | Labor adds $2–$8/sq ft depending on finishes, forms, and site access. |
Related concrete planning tools
Move from a single calculation into a purchase, proposal, or pour-day decision with connected calculators and checklists.
How much does concrete cost per square foot?
Concrete material costs $1.50–$5 per square foot for a 4-inch slab, depending on your region, mix design, and local ready-mix prices. Installed concrete (with labor, forms, and finishing) runs $4–$12/sq ft for a plain slab.
How do I calculate concrete cost per square foot?
Calculate cubic yards from your dimensions, multiply by the local price per yard, add delivery fees, then divide by total square footage. The calculator above does this automatically — enter your dimensions and local prices.
How much does a concrete driveway cost per square foot?
A concrete driveway typically costs $5–$10 per square foot installed, including labor, forms, and finishing. Material alone runs $2–$4/sq ft for a 4-inch driveway slab.
Is concrete or asphalt cheaper per square foot?
New asphalt costs $3–$5/sq ft installed vs $5–$10/sq ft for concrete. Concrete lasts longer (30+ years vs 15–20 years) and requires less maintenance, often making it cheaper over time.
How much extra does stamped concrete cost per square foot?
Stamped or decorative concrete adds $5–$15/sq ft to the base cost, so total installed cost is typically $10–$20/sq ft. Complex patterns and colors cost more.
Planning disclaimer
Cost ranges are for planning purposes. Actual prices vary significantly by region, supplier, and project conditions. Get 2–3 quotes from local contractors and suppliers before committing.